Product list


Inertia Base Frames

Kinetics Model CIB Concrete Inertia Base Frames

As a representative of Kinetics Noise Control, we are pleased to offer inertia base frames, engineered to suit your specific equipment.

KINETICS™ CIB-L inertia base frames are specifically designed and engineered to receive poured concrete, for use in supporting mechanical equipment requiring a reinforced concrete inertia base.
Inertia bases are used to support mechanical equipment, reduce equipment vibration, provide for attachment of vibration isolators, prevent differential movement between driving and driven members, reduce rocking by lowering equipment center of gravity, reduce motion of equipment during start-up and shut-down, act to reduce reaction movement due to operating loads on equipment, and act as a noise barrier.
Typical uses for KINETICS™ inertia base frames, with poured concrete and supported by KINETICS™ noise and vibration isolators, include use with open-type centrifugal chillers, reciprocating air and refrigeration compressors, chillers, and heat pumps, close-coupled and base-mounted pumps, centrifugal fans, internal combustion engines, and similar types of equipment.
Model CIB-L inertia base frames, when filled with concrete, meet all specifications for inertia bases, and when supported by proper KINETICS™ vibration isolators, provide the ultimate in equipment isolation, support, anchorage, and vibration amplitude control.
KINETICS™ CIB-L inertia base frames incorporate a unique structural design which integrates perimeter channels, isolator support brackets, reinforcing rods, anchor bolts and concrete fill into a controlled load transfer system, utilizing steel in tension and concrete in compression, resulting in high strength and stiffness with minimum steel frame weight. Completed inertia bases using model CIB-L frames are stronger and stiffer than standard inertia base frames using heavier steel members.
Standard CIB-L inertia base frames are available in thicknesses of 6 in (152 mm), 8 in (203 mm), 10 in (254 mm) and 12 in (305 mm), in sizes tabulated, and include integral isolator support brackets, steel channel perimeter pouring frame, 1/2-in (13 mm) diameter reinforcing rods on 8-in (203 mm) centers each way, and steel anchor bolts prelocated and fixed in proper locations. KINETICS™ CIB-L inertia base frames are delivered to the job site completely welded and ready to fill with concrete. On-job labor and installation time are minimized, resulting in maximum economy.
Please send shop drawings of your equipment to Colleen, and we will work with Kinetics to design a frame to suit your needs.
For further information visit Kinetics web site here


Copyright 2011 Air System Supplies Design and hosting by Web Masters Corp